Exposure Protection: The In’s & Out’s

A well trained group of firefighters with a solid foundation of a good coordinated fire attack is critical to the success of fireground operations. Plan and simple. Understanding fire attack as well as fire behavior in particular structures also provides a good understanding of exposure protection. Many firefighters if not all firefighters heard of or know the acronym RECEO VS (Rescue, Exposure, Confine, Extinguish, Overhaul, Ventilate, Salvage) which is a critical thinking tool to assist with our tactical decision making based on the situation at hand. This article will talk about the "E" in RECEO VS - exposure. Something that is oftentimes overlooked. 

One third of our fireground responsibilities is property conservation. If we remember, L.I.P. (life safety, incident stabilization and property conservation). This stands true for interior or exterior exposures. Thorough size ups and a well performed search and location of fire will assist our needs of potential exposures and a way for firefighters to get ahead of the fire. One thing we always want to do, is get ahead of the fire before it gets ahead of us. 

A way to get ahead and hopefully stay ahead of the fire is to establish exposure lines in order to protect fire spread through the means of a secondary line(s). By doing so, we are allowing ourselves to stay ahead of any rapid fire progress and putting ourselves in a position to contain the fires forward progress. Fire can and will advance itself in any and all directions based through various ways.

1. Direct flame contact

2. Radiant heat

3. Convection

4. Embers

5. Heat contained in smoke. 

If we can understand where the fire is going, taking into consideration it's speed, type of structure and location to name a few, we can better position ourselves in front of the fire's flow path and cut off any potential exposure problem. 

Interior exposure considerations 

1. The BOX we are working on (4 walls, 1 ceiling, 1 floor). Heat travels up which makes the floor above the fire one of the most critical areas to protect. Don’t forget to check the floors below. Fire can drop floors just as easily as it can travel up floors.

2. Mushroom Effect. Top floors of a structure have a tendency to collect heat, smoke and products of combustion with nowhere to go. A calculated vent will help with reducing this effect.

3. Common cockloft. A hose line, a few pike poles and a TIC can help alleviate fire spread.

4. Interior design. Based on how the structure is designed can determine how fire will spread. Open floor plans present a great opportunity for fire spread since there is nothing to impede heat to travel and fire to spread. Open floor plans are common in both residential and commercial dwellings. Keep a look out for renovations as well. 

Exterior exposure considerations

1.   Structures on the sides of the fire building.

2.   Structures in front of the fire building

3.   Structures to the rear of the building

Note: exposure problems around the exterior of the fire building could be at risk of absorbing radiant heat, therefore hoselines on the exterior should direct their streams to the structures themselves to help reduce the amount of heat they are absorbing and not spray water in the opening between the structures. By spraying water between structures will still allow radiant heat to be absorbed by the exposed structures. 

A group of well trained firefighters in well trained hose deployment techniques allows us to get ahead of the fire before it gets ahead of us.

Until next time; work hard, stay safe & live inspired.

Prepare to Perfrom

We are only as good as our last performance but we are also only as we prepare ourselves to be. Preparation begins long before the call comes in. It even begins before any preplanning is done and crew training. It's done, with one's own self. It's called knowing your job and performing it as if it's the championship game each time you're working. Each firefighter is responsible for their assignments and should know their job better than anyone else. On the flipside, each member of the crew should know their fellow firefighters responsibilities just as well as their own. Without knowing and understanding your role and roles around you even knowing the role above you, success is much harder to achieve and days with lower manpower will impact the rate of success.  

Some will say strategic planning is something for the command and company officers to worry about. I disagree, this is something each firefighter needs to be thinking about in some capacity. Without it, responsibilities cannot be done as efficiently and voids cannot be easier filled. When looking at this in a sports perspective, the great dynasty teams all had one common denominator, great preparation and an understanding of each other's roles. If we take the New England Patriots who won 3 Super Bowls from 2014 until now went by the mantra "Do Your Job" which stood for one thing, know your responsibilities better than anyone else on the field and understand the big picture that is looking to be achieved. By doing this, success will come. The same goes for the fire service. The more each member of the crew knows and the better they prepare, the easier a day on the fire ground becomes.

Here are a few steps on how to prepare to perform.

1. Know your role and own it. Be able to understand and explain to others the ins and outs of your role clearly. 

2. Know and understand the other responsibilities of your crew. This helps become multi-dimensional and can easily back fill other roles should there be a short staff or other circumstances that may arise.

3. Consistently train on your responsibilities and rotate through training on other responsibilities as well. By doing so, it bridges any gaps and helps develop a more unified crew. Example using engine company ops: On a 4 man engine, there's an officer (assumes back-up role), driver, nozzle firefighter and control firefighter (also assumes hydrant duty).  This is a prime example of how firefighters are responsible to one role and yet assumes another role. Continually practice in such roles plays dividends when it is used in the field. 

• Use your resources such as google maps to get aerial views, side views and street views of buildings you want to have specific plans for and even use it for the frequent flyers. Never take anything for granted.

• Develop a plan and train on it consistently and then develop contingencies and train on those. 

• Ensure all crew members understand the strategies and tactics and can clearly explain them. This helps show everyone is clear on the assignments. 

Preparation is key to successful fire ground performance. How you prepare is how you perform. Train accordingly.

Until next time; work hard, stay safe & live inspired.

Why a RIC Team is Important in Today's Fire Service

Life safety on the fire ground is top priority not only for the citizens affected by the incident but also us as the first responders on the scene. By establishing that priority early on, it sets the tone for how firefighters can operate at that given scene. Each of us want to be safe and ensure we go home to our families and so do the ones overseeing the scene, they want and expect the same for us and themselves. Unforeseen circumstances could always arise in this line of work while working in an immediately dangerous to life and health (IDLH)atmosphere that could injury, trap or cause a firefighter(s) to go missing and because of this a dedicated team of specially trained firefighters or what we know as a rapid intervention crew (RIC), are to be established and maintained to rescue a fellow firefighter in distress. Going even further than that, this team must be incorporated into their incident management system and accountability system as per NFPA 2014. So what is the reason for this dedicated crew to standby incase a firefighter goes down?

Here’s are 5 tragic events that changed the course of the fire service and opened the eyes for the need for rapid invention implementation.

1. Columbus, Ohio on July 25, 1987. One firefighter fell through the floor into the burning basement, as conditions deteriorated and several rescue attempts using hoselines, ropes and ladders failed, rescue attempts were halted and this firefighter perished. The “Nance Drill” was then created from these events after it claimed the life of Acting Officer Firefighter John Nance.

2. The Hackensack Ford Fire in Hackensack, NJ on July 1, 1988. Five firefighters get lost and trapped while fighting a fire in the car dealership after the truss roof collapsed and ultimately claiming their lives.

3. Denver, CO on September 28, 1992. One firefighter became separated from his crew and due to a collapse, intense heat and heavy smoke this firefighter was trapped in a storage room with an aisle only 28 inches wide. Firefighters quickly setup ground ladders and removed window bars but it was ultimately too late. This firefighter perished on that day. The “Denver Drill” was then created from these events after it claimed the life of Firefighter Mark Langvardt. 

4. Passaic, NJ on May 9, 2001. One firefighter became trapped while searching for victims on the second floor of an apartment building.

5. Philadelphia, PA on August 20, 2004. Two firefighters were killed and a third was injured after becoming trapped in the basement of a one-alarm fire.

All 3 of these tragic events had no rapid intervention crew established. 

There are many reasons a rapid intervention crew could be activated on the fire ground and unfortunately this team of specially training firefighters are entering probably the most dangerous area of the structure; the place where a firefighter(s) is in distress and calls for help, otherwise known to the fire service as a “MAYDAY”. The reasons for a “mayday” vary but each one should be acted upon quickly and efficiently. 

Reasons for a “MAYDAY” and the activation of RIC.

1. Firefighters run out of air. Possibly due to large areas being worked in.

2. Excessive heat which could cause a heat stroke or a cardiac event.

3. Lack of visibility leading to crew separation and firefighter disorientation.

4. Crew separation due to the possible complexity of the floor plan.

5. Structural collapse 

At any given moment one of these could be messaged over the radio to the Incident Commander and the activation of the rapid intervention crew will need to take place. In order for RIC to be readily available to go to work, a few things need to take place in the anticipation something could go wrong at any moment. 

1. The first 10-15 minutes of a fire is most critical. Have RIC established early on and the RIC officer meet face to face with the IC for any pertinent information that could assist them in their efforts should they be activated. Establishing RIC from the start will help them with deployment and setup time. Also, most RIC established are outside agencies and will need time for travel.

2. The RIC officer should establish a staging area for the crew and all their necessary equipment along with devising a game plan should they be activated. 

3. Develop your own size up of the structure and make it continual throughout the duration of the job since things change. 

4. Determine how many crews are in the structure and the number of manpower on each crew. This will help with your S&T if you should be put to work. 

5. Assist with egress. Take a proactive approach and setup ground ladders for crews operating on upper floors. 

6. Time is critical. Stabilizing the situation quickly is the goal and working with the IC to develop a game plan for efficient firefighter removal (quickly yet systematically) before entering the structure will assist in those efforts. 

7. Bring the tools that are warranted for the situation. As mentioned earlier, RIC has a staging area for crew and tools so it is possible and necessary to stage more tools than you’ll need to go in with yet having excess tools readily available is just as important. 

Tools of RIC

1. Staging tarp for tools

2. RIC Pack – rescue SCBA

3. Forcible entry tools such as a Halligan bar or other pry tools

4. Stokes basket

5. 150-foot search rope

6. Wire cutters

7. Saws (i.e K-12, chainsaw)

8. Thermal imaging camera

9. Box lights

10. Strobe light to identify egress 

11. Life-saving rope/life belt

While there is no viable proof that having an established RIC in place will prevent firefighter fatalities on the fire ground, it is necessary in having one established and ready to go as a way to assist with the rescue and removal of a down fellow firefighter in hopes of a successful save. Any time departments are working on large structures, it is best to have rapid intervention crews on each side of the structure for quicker deployments with hopes of mitigating firefighter fatalities. Further, having an established RIC is a fire service best practice for all scenarios with firefighters working in an IDLH environment. May the lives of the firefighters mentioned in this article and the lives of all the firefighters who have gone before us in the line of duty, may they rest in peace. 

Until next time; work hard, stay safe & live inspired.

About the Author

NICHOLAS J. HIGGINS is a firefighter with 17 years in the fire service in Piscataway, NJ, a NJ State certified level 2 fire instructor, a State of New Jersey Advocate for the National Fallen Firefighter’s Foundation and is the founder/contributor of the Firehouse Tribune website. A martial arts practitioner and former collegiate athlete in baseball, Nick is also a National Exercise & Sports Trainer Association Battle Ropes Instructor, Functional Fitness Instructor and Nutrition Coach.  He holds a B.S. in Accounting from Kean University, and a A.A.S in Liberal Arts - Business from Middlesex County College. Nick has spoken at the 2017 & 2018 Firehouse Expo in Nashville, TN as well as at numerous fire departments within NJ and fire service podcasts.

The Dance of Life

I'm sitting in my room, studying with an intensity I didn't know I had. It's the mid 1980's and I am in middle school. My mom and I had just moved from Philadelphia, PA to Augusta, GA for her first military assignment. It might as well be a different world. There aren’t any Philly cheesesteaks and sports teams that I’m used to seeing. Yet, in this very different place, there is one thing I feel connected to; the very thing I am so intently studying: Breakdancing.

Middle school is an age where I wanted to fit in and be cool. Being prolific in breakdancing isa ticket to coolness. I carefully read, and reread my beloved practice poster (yes, there is a practice poster for breakdancing). I watch and study MTV like a must-see webinar. And the movies! Oh, I watch every single one the day it is released. Now, I’m not really all that good. Dreamsof being a dancer on a rap video are just dreams. But I can spin around on my head and not get sent to the hospital. I work at honing these skills leading up to the next military assignmentthat my mom and I take to Belgium, then Germany. During my high school years, I find to secure the social life I want, I amgoing to need to learn different dances for different occasions. Sure, breakdancing is a great fit for house parties, but what about the Semi-formal winter dance or the Formal Prom. If I amgoing to get dates and not look like a fool, I am going to need to dabble in the right kind of dancing to move my social life along.

Advancing your career with training and education is a lot like learning the right dance. All of the dances are great, but serve a different purpose.

• Dances at the house party is down to earth, wild, sometimes crazy or zany. In your career, this equates to training in the fire service. The drills for new people. Improving the skills of tenured people. Working with other stations and units. There is a general way it should be done, but there is room for creativity.

• Semi-formal dances have a bit more structure. These are your conferences, conventions, 1-3-day trainings. Going to regional schools. Going to FDIC and FRI. They are home grown classes that may have originated at the fire station, but are now on a bigger stage.

• Formal danceshave set expectations for how the event is happening. Dress like this. Move this way. These include official college certifications and formal classes such as Fire Officer I. They take more time and have a set structure. That structure allows for your education to be comparable to others across the world. It helps to measure your investment. It helps to increase your creditability.

Just like my dance life, you will do the most good for yourself by attending all the dances. Over reliance on station training may mean not keeping up with best practices. Over reliance on college and other formal training classes will lead to understanding theory, and not practical application. You are advancing your fire service life; your fire service career. Be sure to take part in training and education in all three parts to be ready for the big dances that are coming. And you won’t need to spin on your head, either!

Ordinary People Have Extraordinary Impact.

About the Author

 NICK BASKERVILLE Nick has had the honor of serving in the United States Air Force for 10 years, followed by 4 years in the United States Air Force Reserves. He attained the rank of Technical Sergeant (E-6). Nick also has 18 years of fire service time, with 15 years of that being in a career department in Northern Virginia. Nick has had the opportunity to hold positions in the Company Officer's section of the Virginia Fire Chief's Association (VFCA), The Virginia Fire Officer's Academy (VFOA) staff, and as one of the IABPFF representatives to the Fire Service Occupational Cancer Alliance. Nick is one of the many trainers for Firefighter Cancer Support Network (FCSN) to offer awareness and prevention training about cancer in the fire service. Nick has the honor of being one of the many contributors for The Firehouse Tribune.

Quick Tips for the Initial Hoseline Deployment

We are the first arriving engine on scene to a working fire and our job is to get water on the fire, right? Absolutely, truth be told that once the fire goes out the problems go away. However, determining the methods of attack and weapons of choice are a whole other ballgame. As we know, the first line pulled is the most important line coming off the first engine. Failure in making the right (critical) decision could make for a long night at the office and require more manpower and more work than originally required. On the flip side, having a not so sufficient crew with the correct line in place could also make for a long night.

Here are a few questions to ask yourself as the initial arriving engine to consider when stretching the initial line in:

1. Consider the size up A.D.U.L.T.S (Advanced Fire on Arrival. Defensive Fire Ops. Unknown Location & Extent. Large Uncompartmented Area. Tons of Water Needed. Standpipe Ops.

2. Structure is 60 feet for more from the curb. Will 200 feet of preconnect work?

3. What’s the dimensions of the structure? Will 200 feet of preconnect still work even if the structure is greater than 60' plus feet from the curb?

4. If not, how many feet of hose will it take to make the fire from the door?

5. Is the line being stretched up or down a stairwell? This will add an additional 50 feet to the line.

6. Where is the crew calling for water? Before the door or inside the structure?

7. Are there any obstructions overhead if a dry line is being deployed?

8. Is there an adequate water supply coming in?

9. Most importantly, what’s the level of manpower?

These questions could all be answered prior to the call during pre-planning and made efficient during training. As we know each situation is different and when things become routine, it sometimes can be dangerous. Don’t be afraid to think outside of the box and explore non convention ways to solving the problem. Knowing our limitations but also knowing the best ways to use the equipment on the engine is a key role in successful fire suppression. The reason I say that is this, the engine carries water, hose (preconnected and not preconnected), tools of all kinds and firefighters for a reason and by knowing how to use the engine in ways other than always pulling preconnected handlines can make for sufficient, smooth and outside the box thinking firefighters. So next time you’re sitting around the kitchen table or on the bumper of the engine, give an address in your area and ask these questions to the firefighters on the crew and lets see how you’re all thinking. A thinking mind is a valuable mind. 

Until next time; work hard, stay safe & live inspired.

 About the Author

NICHOLAS J. HIGGINS is a firefighter with 17 years in the fire service in Piscataway, NJ, a NJ State certified level 2 fire instructor, a State of New Jersey Advocate for the National Fallen Firefighter’s Foundation and is the founder/contributor of the Firehouse Tribune website. A martial arts practitioner and former collegiate athlete in baseball, Nick is also a National Exercise & Sports Trainer Association Battle Ropes Instructor, Functional Fitness Instructor and Nutrition Coach.  He holds a B.S. in Accounting from Kean University, and a A.A.S in Liberal Arts - Business from Middlesex County College. Nick has spoken at the 2017 & 2018 Firehouse Expo in Nashville, TN as well as at numerous fire departments within NJ and fire service podcasts. 

Tis the Season for CO Alarms

It’s that time of the year again, furnaces in full force, fire places in use and gas appliances being used more so now than outdoor grills. With this season change the higher expectation of carbon monoxide alarms begin to rise. Why is this a concern? Carbon Monoxide or CO, is a colorless, odorless, tasteless and flammable gas with it being the leading cause of accidental poisoning deaths in America. 

CO, a byproduct of incomplete combustion of fuel sources such as natural gas, wood, propane and coal to name a few, can be found in many areas of indoor and outdoor living areas such as kitchens, laundry rooms, garages and wood burning stoves and fireplaces. Because of this CO can be generated in 3 ways; through a solid, liquid and a gas.

Examples of forms:

Solid: wood

Liquid: Oil, propane, gasoline 

Gas: Natural gas

Further, CO could also be “man made” through motor vehicle exhaust, cigarette smoke and cooking appliances yet all use some type of fuel source and generated through a solid, liquid or gas.

Physiological Effects 

Annually, several hundred thousand people are exposed to CO poisoning with 20-40% of survivors suffering immediate or delayed neuropsychological deficits and other health damage. One of these is Hypoxic Stress, which is the reduction of oxygen-carrying capacity of blood leading to inadequate oxygenation of cells, tissues and organs. Our brains are susceptible to hypoxia although subtle effects of CO could prevent us from being aware.

Earlier, we mentioned cigarette smoke being a man made cause of CO. Well, in a non-smoker the COHb levels in the blood is between 0.4% and 1.4%. In smokers who smoke one pack per day have up to 5% COHb in their blood. Due to this, cognitive ability in longer term smokers has been known to decrease.

Symptoms of CO

1. Headache

2. Fatigue 

3. Nausea 

4. Dizziness 

5. Confusion

6. Cardiac palpitations

7. Loss of consciousnesses 

8. Coma 

9. Death

Let’s now discuss CO Emergencies

Upon arrival, the first arriving officer should ask the following to the occupants prior to investigating the dwelling:

1. Is anyone experiencing any symptoms? 

2. What appliances were being used prior to the alarm?

If no appliances that would trigger a CO alarm were used or the occupants can’t retrace their steps, here are a few options:

Try and recreate the situation from what the occupants have done over the last 6-10 hours because it could be a slow leak. 

1. Observe the occupants for signs of CO poisoning and ensure they are in fresh air while the scene is being investigated. 

2. Check the fireplace, the furnace intake, draft hood, water heater and gas-fed furnace.

3. Ensure gas flames are blue and not yellow or orange, this is a sign of CO.

4. Laptops or tablets charging. This is rare but could happen. 

5. Check the batteries 

If the source is still unfound, request the local gas and utility company to the scene. Also, if operating in a multi-resident occupancy, check adoring apartments and buildings. Depending on your area, think outside of the box. Does this occupancy have a shared chimney? Is it a duplex? Shotgun house or an odd renovation style? This all could be indicators for unfound CO due to its building construction. 

Lastly, ensure alarms are in their proper locations in the occupancy and always don your SCBA with readings at or exceeding 9 ppm. 

Until next time; work hard, stay safe & live inspired.

About the Author

NICHOLAS J. HIGGINS is a firefighter with 17 years in the fire service in Piscataway, NJ, a NJ State certified level 2 fire instructor and a State of New Jersey Advocate for the National Fallen Firefighter’s Foundation. A martial arts practitioner and former collegiate athlete in baseball, Nick is also a National Exercise & Sports Trainer Association Battle Ropes Instructor, Functional Fitness Instructor and Nutrition Coach.  He holds a B.S. in Accounting from Kean University and is the founder/contributor of the Firehouse Tribune website. Nick has spoken at the 2017 & 2018 Firehouse Expo in Nashville, TN as well as at numerous fire departments within NJ.

You Have Just One Job

 "This shouldn't take too long." I'm not talking to anyone;that's just the thought in my head as I get ready to clean the bathroom today. On the first floor of my house there is a half bath that is just after the front door, on the right side. It's just close enough to the door that if you pull in to the parking space, Dukes of Hazzard style, and busted through the front door to use the bathroom, you can make it without an 'accident' happening. The bathroom needs cleaning. I go to work using an assortment of cleaners; being careful not to cause a hazardous environment needing 911. Now, it's time to mop. That is also the time things go in a new direction. I go to the hallway closet a few feet away on the other side of the hallway. I see a mop handle sticking up, but there is all this stuff in the way. I start cleaning the closet to get to the mop to clean the bathroom. I now have two bags of things to throw out, brooms and other floor cleaning devices neatly arranged, but no mop. A wide area search (of a townhouse, mind you) leads to finding the mop in another bathroom upstairs. To recap, I have cleaned the closet, to find and clean the mop, so I can finish cleaning the bathroom. But while cleaning the mop, I notice there may be a leak coming from the sink I used. So, after cleaning the closet to get the mop, I found and cleaned the mop, then found the leak, then cleaned up the water from the leak to clean the, uh…what was I supposed to be doing again?

At that moment, I see myself in a place I have been before. Perhaps you have found yourself in that same place. I have one thing on my mind to do. In the process of working on that one thing, I accomplish 3 or 4 other things. Never what I set out to do in the first place. Once I realize the situation I am in, it was easy to tell I didn’t use my focus habit.What habit do I use to keep my focus? The yellow sticky note habit.

People who have worked with me have seen and made fun of my yellow sticky note habit. I admit, it's definitely a little odd. I can't remember how I got started using it, but I've done if for a while. I take two 3-inch yellow sticky notes and stick them together back to back so the sticky parts are at opposite ends. Now I have a 3-inch paper that I can write on both sides. On only one side of the note, I write the date and everything I want to try accomplish that day. The rest of the day, the list resides in my pocket. Periodically for the rest of the day, I look at my list and see what I have done, and what I still need to do. Whatever I don't finish, goes on the list for the next day.

Time has taught me that the size of that paper doesn't allow me to put more on it than I can finish in one day. I stay focused, keep track of my progress, and I can evaluate if what I'm doing is more important that what is on my list. I use this at the station, at the office, and sometimes at home. I get laughs about my list at the station, at the office, and sometimes at home. I find that I am more efficient and productive at the station, at the office, and sometimes, at home.

My habit for staying focused may not be for you. It doesn't have to be. We all, however, need some way to keep focused on our intended tasks. Completing tasks, completes objectives. Completing objectives, completes goals. And completing goals is how ordinary people have extraordinary impact.

 About the Author

 NICK BASKERVILLE Nick has had the honor of serving in the United States Air Force for 10 years, followed by 4 years in the United States Air Force Reserves. He attained the rank of Technical Sergeant (E-6). Nick also has 18 years of fire service time, with 15 years of that being in a career department in Northern Virginia. Nick has had

the opportunity to hold positions in the Company Officer's section of the Virginia Fire Chief's Association (VFCA), The Virginia Fire Officer's Academy (VFOA) staff, and as one of the IABPFF representatives to the Fire Service Occupational Cancer Alliance. Nick is one of the many trainers for Firefighter Cancer Support Network (FCSN) to offer awareness and prevention training about cancer in the fire service. Nick has the honor of being one of the many contributors for The Firehouse Tribune.

Nick is also a member of the public speaking organization Toastmasters. He holds an Advanced
Competent Bronze (ACB) certification. He also tells personal narrative stories that have been featured
on shows for The Moth, Better Said Than Done, and Storyfest Short Slam. Follow more about storytelling
and public speaking for purpose at Story Telling On Purpose (www.stop365.wordpress.com)

The Engine Company Search

A critical role and sometimes often overlooked or undervalued is the engine company performing a search. Normally, the truck company is assigned to search and rescue operations however due to limited staffing in many departments across the country, it’s not surprising to be on a hoseline and performing a search (also, a value added role).

Before we can discuss ways to search off a hoseline, here are a few considerations for conducting search and rescue operations.

Questions to consider when determining search operations

1. What areas of the building are being determined as primary search areas?

2. Are there any factors or clues from the incident that are assisting you in determining which areas the search is to begin? (i.e. Possible victims, location of fire, type of structure etc..)

The Primary Search

1. Make it quick. This a quick attempt to remove victim or if on a hoseline, remove the fire and protect the victim.

2. Be quick yet thorough. Check all areas where victims may be even ones that are tenable and safe for a quick search.

3. Trust your senses. Use your eyes, ears and touch.

4. We carry in hand tools for a variety of reasons, use them. Using hand tools to extend your reach off the wall or off your partner can help extend the area of the search and cover more ground in less time. This is especially true for residential homes and small to medium size spaces.

As we just discussed the key points of a primary search, here are 2 ways we can search while operating off a hoseline.

2 Man Hoseline Search

One way the engine company can search a room is allowing the nozzleman into the search room while the backup completes a search of the room. In some instances, the officer and the backup are the same person. If this is the case, the nozzleman will guide the searcher through the room as if it was a quick oriented search. It is to be noted that the nozzleman should place themselves just inside of the doorway. This will allow the searcher a point of orientation and smoother hose advancement once the search of the room is complete. If this is the fire room, it will allow the searcher to move the victim to a safe place of refuge (if need be) while the nozzleman advances in and suppresses the fire.

3 or 4 Man Oriented Search

Same rules apply as if an oriented search was being completed by the truck company. However, this time the nozzleman will advance down the hallway between the adjunct room(s) allowing the searcher(s) and the officer (oriented person) clear access to the room(s). This operation must be predetermined prior to putting in place and practiced before use.  From here, the officer will monitor conditions of the room along with the location and status of the searcher. Searchers will use traditional search methods (right or left hand quick primary sweeps of the room). Once completed, the nozzleman and crew will advance.

Keys to remember when searching as an engine company

1. NEVER pass up fire!

2. Use the TIC to ASSIST the search. Never allow it to take OVER the search.

3. The search should be systematic and towards the fire

4. Communication of doorways AND victims are key

5. Chase and remove all kinks in the hose

Until next time; work hard, stay safe & live inspired

Truck Company Operations: LOVERS__U

The fire service loves acronyms and we have a lot of them. For this discussion we are going to talk about the old acronym for all you truckies out there – LOVERS_U. Before we get into the acronym and details of it, let’s first talk simply about truck company ops.

Truck operations involve a variety of tasks; forcible entry, search, rescue, ventilation, ladder operations (ground/aerial), overhaul, etc. Nowadays with the lack of manpower, squad and engine companies may be needed to perform these operations at any time on the fire ground and are equipped with the tools to do so. Some engine companies may need to perform both truck and engine operations due to lack of manpower or the absence of a truck on scene and vice versa for companies who run quints.

Well here we are, a truck company; what do we do?

Let’s being here with LOVERS_U:

1. Size-up (Yes, truck has its own size up to do). Everything we do on the fire ground calls for a scene size up (and a continual one) to better help us make smart tactical decisions to effectively complete our tasks especially with ventilation. Can this start the LOVERS_U? Hmm….

2. Forcible Entry, if needed (for searching and fire suppression). Sometimes the doors may be unlocked so like they say, “trybefore you pry”. This action should be determined quickly upon arrival in the case of victim removals. Please remember to keep this simple. Remembering your basic tools such as the irons, a hook and/or saw along with variations or combinations of each, can save time and get the job done. The key here is to know your tools and how to use them efficiently.

3. Search (Rescue, if needed). This is very important because we are not only searching for victims but searching for fire both of which may or may not be identifiable from the outside which is why searching is critical on the fire ground. Let’s remember searching for fire can also be done by the suppression team as well. Don’t forget your TIC.

4. a. Ventilation for search team (Vent for life). By venting for life, it is allowing a lot of the thick, black smoke remove itself from the structure giving search teams inside better visibility and time for locating victims.

b. Ventilation for fire suppression (Vent for fire). By venting for fire, this assists the fire suppression team in making an easier push to the fire and much easier extinguishment. This is done with very precise communication between your crew, the suppression team inside and the IC. If done haphazardly, this can be catastrophic.

5. Ladder the building (ingress, egress, vertical/horizontal vent). Every window accessible should have a ladder on it for emergency egress and also for access to the roof and 2nd floor windows for vertical vent. Why not throw a ladder up while heading with your crew to your assignment? Kill 2 birds with 1 stone.

6. Overhaul/Salvage. Once the fire is determined to be out, now it’s time to get inside and open the place up. This is to look for any hotspots and perform another search should any victims have not been found. During this operation, SCBA is still required along with a TIC and hand tools. Using tarps are also considered to help salvage as much property as possible and avoid any smoke and/or water damage.

7. Utilities. This is also known as shutting  down the utilities. Depending on where the utilities are located, this is done by either an interior crew or an exterior crew. Having control of gas, electric and water will help increase the safety of all fire service personnel on the scene.

Now that we discussed primary responsibilities of the truck company, we can now collectively say we have described and discussed LOVERS_U. For all those on truck companies or working with truck company responsibilities keep this acronym in your toolbox when pulling up to a scene, during your pre plans and in your training. It’s a valuable guide to helping you get the job done efficiently, effectively and most importantly safely. 

Until next time; work hard, stay safe & live inspired.

 About the Author

 NICHOLAS J. HIGGINS is a firefighter with 16 years in the fire service in Piscataway, NJ as well as NJ State certified level 2 fire instructor and currently a State of New Jersey Advocate for the National Fallen Firefighter’s Foundation. A martial arts practitioner in Taekwondo, Brazilian Jiu Jitsu and Muay Thai as well as a former collegiate athlete in baseball, Nick is also a National Exercise & Sports Trainer Association Battle Ropes Instructor and studying for the Functional Fitness Instructor certification.  He holds a B.S. in Accounting from Kean University and is the founder/contributor of the Firehouse Tribune website.

The Initial Stretch

The engine company’s main job is to go in and put the fire out, right? Well yes but there’s a lot more to it than just that. For starters, without a thorough size up and hose selection, the task of fire suppression may be a bit more difficult than you think not to mention a preplan of your first due structures and strategic and tactical decisions prior to arrival but those topics are for another time and another day. Let’s also not forget any SOGs or SOPs the department has in place regarding fire attack and hose line operations as each department does things a little differently based on factors known to their department.

The engine company officer on the first arriving engine they have the job of determining the hose line used for the initial fire attack. This decision is critical to how the operation goes from this point on. Determine your hose line is determine by a few areas.

1. Size/type of structure

2. Size, location and extent of fire (if known)

3. Manpower

4. Needed fire flow

5. Method of attack

These items listed are critical in determining which hose line is chosen for any given job but not always used based on the job.

So, the engine company officer determined which line they want pulled for their initial attack; now it’s time to make the stretch. Simple right? Well not, exactly. First off, practice and coordination with your own crew along with other crews going in will make for a smooth or bumpy initial attack. Determining your length of hose will be based on these areas but remember not all are for each job.

1. Method of entry (front, side or rear of structure)

2. Location and extent of fire (if known)

3. Building size (1 length per floor with vertical distance of 10-12 feet)

4. Apparatus distance to the front door

5. Pulling from a preconnecthosebed?

The method of entry is key since there are cases the front door may not be an option and a long stretch is needed to the rear of the structure or even a side door or window. In these cases, a preconnect may not be the best option. However, using a high-rise pack can help increase the lengths to your hose line. The location and extent of fire goes hand and hand with the method of entry since a smoother and quicker attack may be warranted by a different means of entry. This will all depend on an initial size up and 360 of the structure which can be done by the chief officer, if on scene before the engine.

Normally, residential structures are around 2,600 sq. ft. and most are 2 - 2 ½ stories. The first stretch will determine the rest so make sure the stretch from the apparatus to the FRONT DOOR is estimated properly.  After making the front door, it’s now time to determine your stretch to the seat of the fire and knowing where the location and if it is close to a stairwell will help determine this stretch. Keep in mind the rule of thumb for hose stretches is 1 length per floor. Oh, and don’t forget the stairwell if you’re advancing up to a second floor or down to a basement, each flight of stairs will require 1 length of hose.

So, we made the stretch and found the fire room, we did it! Well not so fast, there’s still more work to be done. What’s our nozzle?

Combination Fog Nozzle:

1. Constant Flow Adjustable Gallon Nozzle

2. Low psi Hi Volume Auto Fog Nozzle

3. Automatic

4. Adjustable GPM

5. Fix Variable

Constant Flow Adjustable Gallon Nozzle:

1. Stream is from wide to narrow fog patterns and a compact straight stream

2. GPM setting: 95-120-150-200 when pumped at 100psi

3. Adjustable GPM

Low psi Hi Volume Auto Fog Nozzle:

1. Stream rang from wide to narrow fog and a compact stream

2. Nozzle flows at 200 GPM when pumped at 75psi

3. Fixed GPM

Smooth Bore:

1. Flows unimpeded from the hose through the bail and out the tip and moves at high velocity.

2. Allows for better reach and deeper penetration before it loses mass and breaks apart.

3. Excellent thermal penetration due to increased mass & velocity of the stream and rapidly cools all radiant heat sources along with the primary fuel source simultaneously.

4. Under heavy fire conditions, it allows for fire knock ahead of you rather than having to move closer to it.

Determining the hose size, hose stretch and reach is vital to a successful fire attack. These can be practiced prior to the call in the firehouse, at department burns and through preplanning. These determinations can also be practiced without even pulling hose. Setup cones distances apart and make each cone part of a scene. Make 1 the apparatus, 1 the front door and 1 the seat of the fire. Firefighters will now have to visualize a structure and estimate the lengths of hose needed to make each cone. Granted nothing is better than going out and pulling hose but for quick indoor training to get each other thinking, it does the job.

Let’s get out there, train and remember to never forget the basics.

Until next time; work hard, stay safe & live inspired.

 About the Author      

 NICHOLAS J. HIGGINS is a firefighter with 16 years in the fire service in Piscataway, NJ as well as NJ State certified level 2 fire instructor and currently a State of New Jersey Advocate for the National Fallen Firefighter’s Foundation. A martial arts practitioner in Taekwondo, Brazilian Jiu Jitsu and Muay Thai as well as a former collegiate athlete in baseball, Nick is also a National Exercise & Sports Trainer Association Battle Ropes Instructor and studying for the Functional Fitness Instructor certification.  He holds a B.S. in Accounting from Kean University and is the founder/contributor of the Firehouse Tribune website.